Fix Broadband Connection and Speed Issues

Step by Step Guide on Getting Reconnected

In the unfortunate event that your ADSL2+ Broadband or Superfast Fibre Broadband connection drops out, we have put together help and tips below that we need you to do before reporting a fault which should help to get you connected.

Restart Your Equipment

It sounds really basic doesn’t it? Well performing a simple restart on your hardware such as your router allowing it to reconnect to the broadband service in the case that it has dropped out.

Powering off and on your device also helps it reconnect to the router, re-establishing a connection to the internet as well as other devices on your network.

IMPORTANT: Remember, don’t press any RESET buttons that may be on your router as this may wipe the routers configuration and cause more problems – If you are unsure, please consult your devices manufacturer.

Check The Cables

If the router is located in a busy area, connections from the back of the router may have been disturbed and come loose. These cables can be ethernet cables or even the power cable to the router itself causing the connection to drop out.

Simply reconnecting these cables (or ensuring they are plugged in correctly) may help the connection to come back up.

Remove Extension Leads

Extension leads are great for getting your equipment in the right place, however they can also be the cause of drop outs and intermittent connections.

Simply remove the extension lead from powering the router to see if the routers stability improves.

Replace Line/Micro Filter

The line filter, or Micro filter is the little adaptor that fits in to the telephone socket, with a phone lead connecting to the router.

A microfilter is a device that allows your broadband to work at the same time as your phone. Without a filter, or using a faulty filter you may get problems with stability of your connection and interference/noise on the phone line.

Replacing the filter is a simple task that can help fix intermittent connections.

Disconnect Other Equipment

To remove the possibility that other 3rd party equipment and device causing connection problems, remove all unwanted devices from the network.

If you have additional devices such as your own server, firewalls, network switches etc simply remove the connection from these devices.

To test the connection, ideally it should be:
Connection to Master Socket/Phone Socket  Router  Single Device with a wired connection to the router

IMPORTANT: If you are unsure on disconnecting other hardware and devices, please check with your local IT support or the company who provided the products

Master Socket Only

If your router is connected to a phone extension socket, then the fault may be there.

To test this, locate the Master Socket. Usually the master socket is located at the front of the property, and would be the original/main phone socket installed.

The master socket comes with a hidden test socket which is usually located under the faceplate for the socket. Removing the front of the socket should reveal the test socket.

Connect your router to this test socket and power the router on to see if you can connection. If you can connection, its highly likely that the socket you connect to has a problem.

Slow speed? Try this

Broadband speeds always vary, this can be due to many factors, some you can’t control and some you can.

Below are just a few points to help you get the most out of your internet connection.

Restart Your Equipment

Some devices may operate slower over long periods of time of being connected, so powering off and on again gives the router/device a chance to refresh itself and reconnect.

This is especially important after updates and configuration changes.

Run Speed Tests

Speed test can give you a good indication of what speed your currently receiving however before you run them, you need to ensure your network is at its best.

To get a good reading on speed, perform speed tests from a device that is wired to the router while there are no active users on the network to reduce the chance of slowdown and provide more accurate speeds. The last thing you want is a poor speed test result which is down to a colleague stream videos and download larger files.

Once you have the network ready, head over to Supportal Speed Test. After running a test, you will be asked for your telephone number that your broadband is on, entering this allows us to log the results for diagnostics.

Wired or Wi-Fi

Wired connections offer the most consistent type of connection, sending the data through the cable directly to your device without risk of interference or range, however its not always convenient to be wired in at one place all the time.

Wireless connections offer more flexibly, however have a higher chance of providing a lower connection speed due to interference from other electrical devices such as wireless phones, microwaves etc as well as obstacles such as thick stone walls between your device and the router.

If your experiencing slow speed, its best to disconnect everything from the network, connect an ethernet cable to the router and plug the other end in to your device and run tests this way. This eliminates potential issues with being on WIFI.

Know Your Devices/Users

Having the fastest internet possible is great, but knowing what is connecting and what people are doing are vital for any business.

The connection speed can be limited by a device/user/software accessing the internet using the available bandwidth without your knowledge, resulting in all users having a poor experience.